Function Introduction Of Speed Limited Voice Alarm For WT2007C Forklift

The forklift speed limit voice alarm is a forklift over-speed warning automatic alarm (can pass the oil Road) equipment, realizes the forklift speed limit function, and is also called the forklift over-speed alarm in the forklift safety field. Optional wireless sensor simplifies installation; work DC12V-24V (expandable 48V), suitable for all forklift brand branding. The principle of the forklift speed limiter is detected by the speed detector (sensor) of the forklift, and then the data is entered into the host of the speed limit device. For example, the over-speed will control the alarm loudspeaker, the alarm lamp, and even break the oil path to reach the speed limit function of the forklift. It contains two sensing modes, and one of them can only be used: one is the conventional metal sensor, the other is the wireless sensor. One of the highlights of the wireless sensor is that it is easy to install and use the non-contact wireless sensor, which greatly improves the inconvenience of previous product installation.

Forklift

Product features:

Remote control setting function, the remote control can be set in the range of 10 meters. The remote control keys are few, the operation is simple, and the functions are complete. 4 level volume is adjustable, it can set the volume for different occasions. External loudspeaker alarm, loud voice, sound quality, alarm sound up to 120dB; Two kinds of alarm tips: super bright alarm lights, voice alarm. The external super bright warning lamp lights the forklift speeding. Using WT series voice chip as the core of the alarm circuit, the alarm voice can be changed at will. Two level speed setting, over different levels of speed, a different voice to prompt alarm. The alarm locking time is adjustable in 0~99 seconds, and the speed of the forklift truck exceeds the preset speed continuously. The waterproof grade is 8 and can be immersed in water for work. The use of metal sensor installation mode, you can use on-off oil circuit function; The use of wireless sensors greatly simplifies the installation. The range of working voltage is DC12V to 24V; Working power is low, which reaches only 5W. With over-speed recording function, 9999 over-speed records can be recorded.

forklift

Characteristics of nine core electronic car speed limiter are as follows:
1, the remote control setting function can set parameters, and the electronic governor cannot change the speed limit on his own, so the management has the right to modify.
2, a wide range of applications can be used on 12V~24V for pulling mechanical pedals on cars.
3, it is lightweight and easy to install. It adopts full floating type shockproof design and has good seismic performance.
4, the power line has short circuit design, built in overcurrent protection circuit and strong stability.
5, free maintenance, free mechanical contact and electronically controlled mechanical design features. Once installed, there will be no worries in life.
6, it can force a speed limit, do not extinguish, do not affect torque and horsepower, safety and speed limit, but also enable voice and alarm warning.
7, the forced speed limit is reduced uniformly, and throttle can move freely within the speed limit.
8, it can set alarm speed alarm, achieve speed limit, speed limit and intelligent voice prompt.
9, it has the function of intelligent learning speed meter. It can directly connect all kinds of vehicles to the speedometer and is easy to install.
10, you can memorize all kinds of parameters by yourself, once and for life.
11, the range of working voltage is DC12V to 24V;
12, work is small power, only 5W.