Protocols To Be Followed For Caring Of Laboratory Equipment

The success of an experiment depends on a lot of things like Laboratory Equipment appropriate amount used for chemicals, cleaning equipment after usage, handling chemical reactions with full gears, etc. It is not an easy task to take care of the lab and its equipment. Proper cleaning and care are required otherwise experiment may not go as per expectation. For cleaning the lab equipment, you need the appropriate solution so that while cleaning no residue of the last trial left inside the glassware.

Just make sure that you are aware of all the safety and cleaning procedures of equipment if you work in a lab. Before initiating a new experiment, it is crucial to clean all the glassware otherwise there will be variation in the chemical result.

Laboratory Equipment

Essential tips for cleaning laboratory equipment

It is an excellent practice to wash the glassware immediately after the experiment gets over. This way you can control the dirt easily, and even the life of glassware can get extended for long. Keep in mind to use only laboratory specific solution or detergent for cleaning the glass. If you use any other soap, then there might be a reaction, and the result can be hazardous for the skin. The lab caretaker should be aware of it and the solution to be used for cleaning purpose should be of the non-reactive agent.

Sometimes, for cleaning the glassware, there is no actual requirement for water and detergent. You can rinse the glassware with a solvent which is non-reactive and cleans the dirt and residue properly. In fact, distilled water can be an excellent solvent to flush the glassware. That could be sufficient to clean the glassware. Most equipment in the labs is made of glass because they are non-reactive and when you pour any chemical inside then there is no reaction between chemical and glass. That is why mainly chemicals get stored in glass bottles. Before pouring any chemical solution in the glassware, make sure that the tubes are clean and dry.

Sometimes while reactions occur, there are some by-products which are of a greasy nature, and they are tough to clean off from the glassware. In that case, boil the lab glassware in a weak solution like sodium carbonate to an optimum temperature and after that use alkali for the final cleaning. It is advisable that while washing glassware, wear gloves otherwise there might be a risk of getting cut on the hand. Cuts due to glassware are widespread and as caution users must wear gloves.

laboratory equipment

Using different chemicals for cleaning glassware

The popular solution that gets used for cleaning glassware is chromic acid. An aqueous solution of low toxicity is also used for cleaning purpose. Alkali and surfactants at the right temperature can also get used as a cleaning agent. Some agents are hazardous for the environment, so there is a ban on their usage in the labs.

Conclusion

One should be cautious and wear all protective gears while cleaning glassware in the lab. Follow instructions for cleaning the laboratory equipment properly.

Bio

Trudy is a Business Tech Analyst. He is very responsible towards his job. He loves to share his knowledge and experience with his friends and colleagues.